Filter
Top Products
For more information, see HP Insight Management Agents for Linux on HP Integrity Servers:
Installation Guide and Release Notes:
http://www.docs.hp.com/en/5991-2731/
HP System Management Homepage
The HP System Management Homepage (SMH) is a web server that can be used by HP
web-enabled system management software. The System Management Homepage provides an
interface between the HP Insight Management Agents and the HP manageability tools. The HP
System Management Homepage software organizes data from HP Insight Management Agents
installed on a server into easy-to-read tables that are displayed in a web interface.
For more information, see the HP System Management Homepage website:
http://www.hp.com/servers/manage/smh
HP Server Manageability eXtensions
The HP Server Manageability eXtensions (SMX) is a manageability framework for HP Proliant
and HP Integrity servers using Web Based Enterprise Management (WBEM) and the Common
Information Model (CIM). SMX is designed to run on HP servers and provide complete
manageability as defined by the Distributed Management Task Force (DMTF), Storage Networking
Industry Association (SNIA) and the HP WBEM Technical Committee (TC).
HP WBEM Providers for Linux
WBEM is a Distributed Management Task Force (DMTF) standard that uses Internet technologies,
such as XML, HTTP, and SSL, to manage systems. HP WBEM Providers for Linux allows
management applications such as HP Systems Insight Management to retrieve, monitor, and
configure system information. HP WBEM Providers are the instruments that provide system
data for the management application.
For more information, see the HP WBEM Solutions for Linux website:
http://www.hp.com/go/wbemlinux
HP Partition Manager
HP Partition Manager provides you with a convenient GUI to configure and manage nPartitions
on HP servers. Using HP Partition Manager, you can perform complex configuration tasks
without having to remember commands and parameters. You select nPartitions, cells, I/O chassis,
or other components from the graphical display, and then select an action from a menu. HP
Partition Manager is installed on your HP Integrity system by default when HP nPartitions
commands are installed; HP Partition Manager is not installed as a standalone application.
You can use HP Partition Manager to perform the following tasks: create, modify, and delete
nPartitions, examine the nPartition configuration of a complex (all of hardware within a
server—including all cells, I/O chassis, cables, cabinet hardware, and power and utilities
components), check the complex for potential configuration and hardware problems, and manage
hardware resources on the complex.
IMPORTANT: Before installing HP Partition Manager, you must download and install the Sun
JDK 6 or BEA JRockit 5.0. For the JDK installation details, see “Product Installation Dependencies”
(page 42).
HP nPartition Commands
HP nPartition Commands enable you to create, modify, and delete nPartitions on HP nPartition
servers, including HP Integrity servers such as the Superdome, rx8640, rx8620, rx7640, and rx7620
servers. The manpages for these commands are also installed.
40 Installing and Using the HP Support Pack