Filter
Top Products
Uninstall HIFIL
This option is displayed only when HP Management Base is installed on the system.
To remove the HIFIL product, including HP Management Base, enter the appropriate
option number and press Enter. The installer returns to the menu after the entire HIFIL
product is removed.
4. Enter an option from the menu and press Enter.
NOTE: If HP Management Base is installed and you select it for installation, the installer
will ask if you want to upgrade or uninstall it. Choosing to upgrade the product may reveal
dependency conflicts, which will require you to intervene. Instructions for solving these
conflicts or how to properly configure HP Management Base are provided by the installer.
NOTE: There is a known compatibility issue with HP ACU-CLI and RHEL5U1 on HP
Integrity servers with a SmartArray controller configured with more than one logical drive.
To avoid creating this adverse condition, the installer will not install the HP ACU-CLI
(hpacucli) product on these servers and this option is not displayed in the product
installation menu. Further, if hpacucli is detected on the system, it is uninstalled by the
installer.
5. After the installation is complete, you must start the appropriate framework to access any
providers, execute one of the following:
WBEM Providers (OpenPegasus) on RHEL or SLES 10:
# /etc/init.d/tog-pegasus start
SMX WBEM Providers (SFCB) on SLES 11:
# /etc/init.d/sfcb start
NOTE: The installation log for the HP Support Pack is located in
/var/log/hp/managementCD-version_number-install.log. This directory is applicable
if the media you are using is CD/DVD or the USB HDD.
Installing Software from the HP Support Pack 47