Filter
Top Products
Removal and replacement procedures 27
2.
Extend the server on the rack rails until the server rail-release latches engage.
3. After performing the installation or maintenance procedure, slide the server into the rack by pressing the
server rail-release latches.
Remove the server from the rack
WARNING: The server weighs approximately 36.3 kg–49.9 kg (80.0 lb–110.0 lb). To reduce
the risk of injury, remove the following components before removing the server from the rack:
• Processor memory drawer ("Remove the processor memory drawer" on page 29)
• Hard drives ("SAS/SATA hard drive" on page 30)
• Power supplies ("Hot-plug power supply" on page 47)
The server weighs 21.8 kg (48.0 lb) with these components removed. Two people might be
required to remove the server from the rack.
1. Power down the server (on page 26).