Filter
Top Products
Removal and replacement procedures 31
3.
Remove the hard drive.
To replace the component, reverse the removal procedure.
Heatsink
To remove the component:
1. Power down the server (on page 26).
2. Remove the processor memory drawer shipping screws, if installed. Retain the screws for future use
("Processor memory drawer shipping screw locations" on page 28).
3. Remove the processor memory drawer (on page 29).
CAUTION: To prevent damage to the processor memory drawer cover, be sure the handle of the
processor memory drawer is fully open before removing the cover.
4. Be sure the handle on the processor memory drawer is completely open, and then remove the processor
memory drawer cover.