Filter
Top Products
Removal and replacement procedures 50
8.
Remove the SFF drive cage.
9. Remove all drives from the drive cage ("Drive" on page 35).
10. Loosen the thumbscrew on the drive backplane and remove it from the cage.
To replace the component, reverse the removal procedure.
LFF drive backplane
To remove the component:
1. Do one of the following:
o For tower models, open and remove the bezel ("Remove the tower bezel" on page 26).
o For rack models, if installed, remove the security bezel (on page 26).
2. Power down the server (on page 25).
3. Remove all power: