Filter
Top Products
Removal and replacement procedures 55
2.
Extend or remove the server from the rack ("Remove the server from the rack" on page 28, "Extend the
server from the rack" on page 28).
3. Remove the access panel ("Access panel" on page 34).
4. Remove the PCI riser cage ("PCI riser cage" on page 44).
5. Remove the air baffle ("Air baffle" on page 49).
6. Remove the fan blanks.
7. Remove the fans ("Hot-plug fan" on page 36).
8. Remove the fan cage.
To replace the component, reverse the removal steps. Press down on the top of each fan to be sure it is seated
properly.
Heatsink
To remove the heatsink:
1. Power down the server (on page 27).
2. Extend or remove the server from the rack ("Remove the server from the rack" on page 28, "Extend the
server from the rack" on page 28).
3. Remove the access panel ("Access panel" on page 34).
4. Remove the PCI riser cage ("PCI riser cage" on page 44).
5. Remove the air baffle ("Air baffle" on page 49).