Filter
Top Products
5. Remove the flash drive (3) from the flash drive bay.
6.
If it is necessary to replace the flash drive bracket, slide the module out of the bracket.
Reverse this procedure to reassemble and install the flash drive.
Memory module
Description Spare part number
1024-MB (PC2-5300, 667-MHz, DDR2) 414046-001
Before removing the memory module, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off, turn the computer on, and then
shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see
Battery on page 29).
Remove the memory module:
1. Loosen the Phillips PM2.0×6.0 captive screw (1) that secures the memory module compartment cover
to the computer.
Component replacement procedures 31