Filter
Top Products
Diagnostics menu
Select To do this
Memory Check Run a comprehensive test on system memory.
System Configuration menu
NOTE: Some of the listed System Configuration options may not be supported by your computer.
Select To do this
Language (or press f2) Change the Computer Setup language.
Boot Options
●
Set an f9, f10, and f12 delay when starting up.
●
Enable/disable CD-ROM boot.
●
Enable/disable floppy boot.
●
Enable/disable internal network adapter boot and set the boot mode (PXE).
●
Enable/disable MultiBoot, which sets a boot order that can include most boot
devices in the system.
●
Set the Express Boot Popup delay in seconds.
●
Set the boot order.
Device Configurations
●
Swap the functions of the fn key and left ctrl key.
●
Enable/disable USB legacy support. When enabled, USB legacy support allows
the following:
◦
Use of a USB keyboard in Computer Setup even when a Windows
operating system is not running.
◦
Startup from bootable USB devices, including a hard drive, diskette drive,
or optical drive connected by a USB port to the computer.
Built-In Device Options ● Enable/disable embedded WLAN Device Radio.
●
Network Interface Controller (LAN).
●
LAN/WAN switching.
●
Enable/disable Wake on LAN.
●
Enable/disable the optical disc drive.
Port Options
●
Enable/disable the USB port.
●
Enable/disable the PC Card slot.
Computer Setup menus 63