Filter
Top Products
Modem module cable
NOTE: The modem module cable is included with the system board frame, spare part number
480894-001. See
System board and system board frame on page 52 for system board frame information.
Before removing the modem module cable, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off, turn the computer on, and then
shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see
Battery on page 29).
5.
Remove the following components:
a.
Flash drive (see
Flash drive on page 30)
b.
Optical drive (see
Optical drive on page 33)
c.
Keyboard (see
Keyboard on page 35)
d.
Switch cover (see
Switch cover on page 43)
e.
Display assembly (see
Display assembly on page 45)
f.
Top cover (see
Top cover on page 49)
g.
System board (see
System board and system board frame on page 52)
Remove the modem module cable:
▲
Remove the modem module cable from the clips built into the system board frame.
Reverse this procedure to install the modem module cable.
Component replacement procedures 57