Filter
Top Products
Speakers
Description Spare part number
Speaker Kit (includes left and right speakers and cable) 641396-001
Before removing the speakers, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
Battery on page 37), and then remove the following components:
●
Optical drive (see
Optical drive on page 39)
●
Hard drive (see
Hard drive or SSD on page 41)
●
Keyboard (see
Keyboard on page 47)
●
Top cover (see
Top cover on page 50)
Remove the TouchPad LED board and cable:
1. Disconnect the speaker cable (1) from the system board.
2. Remove the speakers (2).
Reverse this procedure to install the speakers.
Component replacement procedures 57