Filter
Top Products
NOTE: The following illustration shows the replacement thermal material locations on a
computer model equipped with an Intel processor and a graphics subsystem with
discrete memory.
●
Thermal paste is used on the processor (1) and the heat sink section (2) that services it
●
A thermal pad is used on the graphics subsystem chip (3) and the heat sink section (4) that
services it
NOTE: The following illustration shows the replacement thermal material locations on a
computer model equipped with an Intel processor and a graphics subsystem with UMA memory.
Thermal paste is used on the processor (1) and the heat sink section (2) that services it.
9. If it is necessary to replace the fan:
a. Remove the two Phillips M2.0×3.0 screws (1) that secure the fan to the heat sink.
b. Release the two clips (2) that secure the fan to the heat sink.
70 Chapter 4 Removal and replacement procedures