Filter
Top Products
English 13
2 How to Install Accessories In Your PC
Removing and Replacing the Cover
Removing and Replacing the Cover
Removing the Cover
1 Switch off the display and computer.
2 Disconnect all power cables and any telecommunications cables.
3 If necessary, unlock the cover using the key on the front panel.
4 Lift the two latches on the front sides of the computer upwards. Slide
the cover forwards and off the computer.
Replacing the Cover after Installing Accessories
1 Ensure that you have installed all your accessories and that all
internal cables are properly connected and safely routed.
2 Ensure that the two latches on the front sides of the cover are
upwards, and that the lock is unlocked.
3 Slide the cover onto the computer, making sure that the two guides
at the bottom of the case slide into the two rails at the base of the
computer. Firmly slide the cover backwards into position.
4 Lower the two latches on the front sides of the cover.
5 If required, lock the cover using the key provided.
6 Reconnect all the power cables.
cobra-m2.fb4 Page 13 Wednesday, May 15, 1996 3:28 PM