Filter
Top Products
2 Connecting to a Netware 4.11 Server
Windows 95 SR2
Windows 95 SR2 Requirements
• HP Vectra with Windows 95 SR2 installed.
• IBM Auto 16/4 TR adapter and drivers diskettes ver 2.1
Driver Name: NETIBM4.INF Size: 30KB Date: 1/30/98
• Microsoft Windows 95 SR2 media.
• Novell Netware 4.1 server that supports Net BEUI, NWLink IPX/SPX, and
NWLink NetBIOS transfer protocols.
Device Configuration
Procedure
1 With the HP Vectra turned off install the IBM Auto 16/4 TR adapter card
into an ISA slot.
2 Insert the IBM TR drivers disk 1 of 4 and power on the machine.
3 After the machine boots, select option 2 “IBM Auto 16/4 Token-Ring ISA
Configuration using LANAID” and hit enter.
4 When prompted, press any key to continue with the LANAID setup
program.
5 Type “/VIEW” and verify the settings as listed above under the heading
“Device Configuration.”
6 Make any changes, exit LANAID, and remove the drivers diskette.
Vectra VL8 Vectra VE7/VE8
Interrupt 10 3
I/O Address A20 EFC-EFF
Adapter Mode Auto16 Compatible -
Configuration Automatic -
RAM Address D8000-D9FFF -
RAM Size 16 Kb -
ROM Address - C8000-C9FFF
Token Ring Rate - 16