Filter
Top Products
4 Connecting to a Windows NT Server 4.0
Windows NT Workstation Version 4.0
10 In the Network Setup Wizard dialog box, make sure that “Wired to the
Network” is checked and click on “Next”.
11 Click on “Select from list” and click on “Have Disk” and set path to “A:\NT”
(If you have a preloaded HDD, set path to
“C:\Masters\LanDrv\Turbo164\DISK2\NT”)
12 In the “Select OEM Option” dialog box, make sure that “IBM Shared RAM
Token Ring Adapter” is highlighted and click on “OK” and then click on
“Next”.
13 Select all applicable protocols and click on “Next”
(If you do not have the required information, contact your network
administrator.).
14 Select all required network services and click on “Next”
(If you do not have the required information, contact your network
administrator.).
15 Click on “Next” to start component installation.
16 Insert the Windows NT Workstation CD.
17 In “Windows NT Setup”, set the path to your NT files and click on the
“Continue” button.
(If you have an HP preloaded HDD, set path to “C:\I386”)
18 Setup will ask for your driver files location again. Enter “A:\NT” ”
(If you have a preloaded HDD, set path to
“C:\Masters\LanDrv\Turbo164\DISK2\NT”)
19 Select “IBM Turbo 16/4 Token-Ring ISA Adapter” and click on “OK”.
20 Select the applicable I/O address and click on “OK.”
21 Approve the default Bus Location and hit enter.
22 Click on “Yes” or “No” for DHCP server setup ”
(If you do not have the required information, contact your network
administrator.).
23 Set your IP address information in the “TCP/IP Properties” dialog box,
and click “OK.”
24 Click on “Next” to accept the default network binding settings.
25 Click on “Next” to start NT networking.