Filter
Top Products
4 Connecting to a Windows NT 4.0 Server
Windows for Workgroups
4 Connecting to a Windows NT 4.0 Server
Windows for
Workgroups
Requirements
• HP Vectra with Windows for Workgroups 3.11 installed.
• IBM Auto 16/4 TR adapter and drivers diskettes ver 2.1
Driver Name: IBMTOK5.386 Size: 46K Date: 9/28/96
• Microsoft Windows for Workgroups 3.11 media.
• Microsoft Windows NT 4.0 server that supports Net BEUI, NWLink IPX/
SPX, and NWLink NetBIOS transfer protocols.
Device Configuration
Procedure
1 With the HP Vectra turned off install the IBM Auto 16/4 TR adapter card
into an ISA slot.
2 Insert the IBM TR drivers disk 1 of 4 and power on the machine.
3 After the machine boots, select option “IBM Auto 16/4 Token-Ring ISA
Configuration using LANAID” and hit enter.
4 When prompted, press any key to continue with the LANAID setup
program.
Vectra VL8 Vectra VE7/VE8
Interrupt 10 3
I/O Address A20 EFC-EFF
Adapter Mode Auto16 Compatible -
Adapter
Configuration
Automatic -
RAM Address D8000-D9FFF -
RAM Size 16 KB -
ROM Address - C8000-C9FFF
Token Ring Rate - 16