Filter
Top Products
hp designjet 815mfp & scanner 4200 37
Panel. But, in this case, add 50 to the fourth (final) part of the
IP address. If the resulting number is greater than 255, change
it to 255.
8. Click OK until all dialog boxes have closed.
You have now configured your TCP/IP settings.
how do I create a workgroup?
You need to create a workgroup in order to Scan to Network.
to create a workgroup…
1. Press the Quit button and select Exit to exit your
scanner system software.
2. Press the System Setup button.
3. Press the Network Domain button. The System Properties
window will appear. Select the Network Identification tab.
4. Click the Network ID button. The Identification Changes
window will appear.
5. Enter the name of your domain, and the name of the
workgroup you wish to create, then click OK.