Filter
Top Products
38 hp designjet 815mfp & scanner 4200
how do I automatically log in (in network
configuration)?
This procedure must be performed by System Administrators only,
and is applicable to the scanner in network configuration.
to log in automatically…
1. Press the Quit button and select Exit to exit your
scanner software.
2. Press the Start button on the Windows taskbar, and select Run.
3. Type regedit and then press the OK button.
4. In the Registry Editor, navigate to HKEY_CURRENT_USER
\Software\Microsoft\Windows\Windows NT\CurrentVersion
\Winlogon.
5. Check that the following entries and their values are present as
described in the table below. If they are not present you can
add them by selecting New from the Edit menu. If they are
present and you need to modify the value data, select the
value and Modify from the Edit menu.
where Myxxxxxx are the domain data, user name and
password to use in the automatic login.
6. Exit the Registry Editor to return to your Active Desktop.
The next time you restart your system the login will not be requested.
how do I set the scanner system power up/down
timer?
If a scan is being done when power off time is reached, automatic
power off is delayed by 15 minutes.
If the scanner is manually started, 3 hours will have to pass before it
goes into standby.
value value data
DefaultUserName MyUserName
DefaultPassword MyPassword
DefaultDomainName MyDomainUser
AutoAdminLogon 1