Filter
Top Products
Installing the Software 27
G:\TW\Lori\Raptor\C4388-90100\exraptor1.fm Page 27
Last Modified: Tuesday, January 27, 1998 8:33 pm
Printing date: Saturday, April 04, 1998
Configuring the Drive for Windows NT 4.0
Your HP Colorado tape drive can be successfully installed with Windows NT 4.0.
Use the backup application that is part of the standard Windows NT 4.0 setup.
Simply install the tape drive’s driver files by following the directions below.
1. Attach the tape drive to your parallel port as described in “Connecting the Hardware”
on page 4. The drive must be attached to install and configure the software.
2. Start up your computer and log in with Administrative rights.
3. Insert the software installation CD into your CD-ROM drive. If your computer does
not have a CD-ROM, see page 35.
4. If the first screen does not appear automatically, click the
Start
button on the
Windows NT task bar, select
Run
, type D:\SETUP (where D: is your CD-ROM’s
drive letter), then click on
OK.
The following screen appears:
5. Select the desired language or leave the default. Click on
Next.