Filter
Top Products
25
install a Socket or Anycom Bluetooth card
Installation instructions may vary by manufacturer. If your Bluetooth card comes with
installation instructions, follow the instructions that came with your card. Otherwise,
follow the instructions below:
1. Place the Jornada in its cradle.
2. Insert the Bluetooth software CD in the computer’s CD-ROM drive.
3. Follow the onscreen instructions to install the Bluetooth software.
4. After the software has been installed, remove the Jornada from its cradle.
5. Press the
Reset button once.
Wait for the Jornada to reboot, then press the
Reset button again. The Reset
button is located on the back of the Jornada 500.
Caution! Failure to reset the Jornada 500 series twice after installing an
Anycom Bluetooth card prevents the Jornada from printing correctly
over a Bluetooth connection.
6. Insert the Bluetooth card in the expansion slot.