Filter
Top Products
62
after HCRP installation the printer icon does not appear in My Printers list
The printer’s encryption settings may be incorrect if the printer icon does not appear
in the
My Printers list after you have done the following:
• Installed the printer software
•Run the
Bluetooth Connection Wizard to establish an HCRP connection to the
printer
Follow these steps to correct the printer’s encryption settings:
1. Press and hold down the
Cancel (X) button for 4 seconds to print a Bluetooth
Configuration page.
2. Find the Encryption Required line item on the Bluetooth Configuration page:
if the Encryption Required
line reads...
Then...
Encryption = 0
Encryption Off
The printer does not require encryption.
Encryption = 1
Encryption On
The printer requires encryption.