Filter
Top Products
77
3. Click the
Change PIN Code button.
The Change PIN Code dialog box appears.
4. Enter the new PIN Code.
The default PIN Code is
0.
5. Re-enter the new PIN code.
6. Click
OK.
The PIN code is changed.
reset device access
In order to change the printer’s wireless settings you must connect the printer to your
computer with a USB cable. Follow these steps to clear all bonded devices from the
printer’s memory:
1. Open the Toolbox, then open the Configure Wireless Settings dialog box.
2. Click the
Reset Device Access button.
A warning dialog box appears.
3. Click
OK to close the warning dialog box.
All bonded devices are removed from the printer’s memory.
reset to factory defaults
Follow these steps to reset the printer to the factory default settings:
1. Press and hold down the
Power button.
2. While holding down the
Power button, tap the Cancel (X) button 4 times, then
tap the
Resume button 4 times.
3. Release the
Power button.