Filter
Top Products
50
3.
Remove any obstacles between the two devices.
The infrared light begins to blink when the devices are correctly aligned.
4.
Send a file to print following normal print procedures.
The infrared light on the printer displays a solid beam during the transfer
process. When printing is complete, the light begins to blink.
If the Infrared Monitor is displayed, the Status tab indicates the progress
of the infrared activity as the printer receives and prints the file.
selecting the printer in Windows 2000
1.
Click
Start
>
Settings
>
Printers
to open the Printers window.
2.
Right-click
hp deskjet 9xx series printer
to view the shortcut menu.
3.
Select
Properties
.
4.
Select the
Ports
tab.
5.
Select
IR Local Port
.
6.
Click
OK
.
printing in Windows 2000
1.
Locate the infrared lens on the laptop or notebook.
See the computer’s operating manual for the location of the infrared lens.
2.
Align the computer’s infrared lens with the printer’s infrared lens.
The computer should be positioned no more than one meter (three feet)
from the printer and within a 30-degree total angle from the printer’s
infrared lens.
3.
Remove any obstacles between the two devices.
The infrared light begins to blink when the devices are correctly aligned.
If the laptop or notebook is moved out of range of the printer’s infrared
lens at any time during the printing process, the infrared light turns off
and the printer stops printing. Realign the devices within 3-30 seconds,
and the print job will resume.