Filter
Top Products
Speaker
Description Spare part number
Speaker 645330-001
The speaker is mounted to the inside front of the chassis with two screws.
1. Prepare the computer for disassembly (
Preparation for Disassembly on page 76).
2. Remove the computer access panel (
Computer Access Panel on page 77).
3. Disconnect the speaker wire from the white system board connector labeled SPKR (1).
4. From the inside of the unit, remove the two screws (2) that secure the speaker to the front of the
chassis.
5. Rotate the top of the speaker downward slightly, and then remove it from the chassis (3).
Figure 6-42 Removing the speaker
To install the speaker, reverse the removal procedures.
Speaker
113