Filter
Top Products
10.
Connect external cables to the installed card, if needed. Connect internal cables to the system
board, if needed.
11. Replace the computer access panel.
12. If the computer was on a stand, replace the stand.
13. Reconnect the power cord and turn on the computer.
14. Lock any security devices that were disengaged when the access panel was removed.
15.
Reconfigure the computer, if necessary.
System Board Connections
Refer to the following illustration and table to identify the system board connectors for your model.
Figure 8-11 8200 Elite Series system board connections
Table 8-1 8200 Elite Series system board connections
No. System Board Connector System Board Label Color Component
1 DIMM4 (Channel A) DIMM4 white Memory Module
2 DIMM3 (Channel A) DIMM3 black Memory Module
3 DIMM2 (Channel B) DIMM2 white Memory Module
4 DIMM1 (Channel B) DIMM1 black Memory Module
5 Power SATAPWR0 black SATA Optical Drives
6 Power SATAPWR1 black SATA Hard Drives
7 SATA 3.0 SATA0 dark blue 1st Hard Drive
8 SATA 3.0 SATA1 light blue 2nd Hard Drive, or 2nd Optical
Drive if an ESATA Adapter Cable
exists
9 SATA 2.0 SATA2 white 1st Optical Drive
180 Chapter 8 Removal and Replacement Procedures – Small Form Factor (SFF) Chassis