Filter
Top Products
10.
Reposition the subpanel (rotate it 90º) with the logo at the bottom, then snap it back into the bezel.
Figure 6-52 Changing from a Minitower to a Desktop Configuration
11.
Replace the front bezel and computer access panel.
12. Reconnect the power cord and turn on the computer.
13. Lock any security devices that were disengaged when the computer access panel was removed.
Changing from a Desktop to a Minitower
Configuration
1. Prepare the computer for disassembly (Preparation for Disassembly on page 76).
2. Remove the computer access panel (
Computer Access Panel on page 77).
3. Remove the front bezel (
Front Bezel on page 78).
4. Disconnect all power and data cables from the back of the drives in the 5.25-inch drive bays.
Changing from a Desktop to a Minitower Configuration
125