Filter
Top Products
Front Bezel Security
The front bezel can be locked in place by installing a security screw provided by HP. To install the
security screw:
1.
Prepare the computer for disassembly (
Preparation for Disassembly on page 76).
2. Remove the computer access panel (
Computer Access Panel on page 77).
3. Remove the front bezel (
Front Bezel on page 78).
4. Remove the security screw from the inside of the front bezel.
Figure 6-3 Retrieving the Front Bezel Security Screw
5. Replace the front bezel.
6. Install the screw through the interior of the front of the chassis into the front bezel. The screw hole
is located on the left edge of the chassis next to the top hard drive bay.
Figure 6-4 Installing the Front Bezel Security Screw
Front Bezel Security
79