Filter
Top Products
Installing the SCSI Miniport Driver
26 AB232A PCI-X Host Bus Adapter Installation Guide
Device Driver Installation
This section describes the instructions for installing the Windows SCSI Miniport
driver.
System Requirements
Ensure that your system meets these minimum requirements:
■ Installed HBA
■ StorageWorks Fibre Channel Storage subsystem (interconnect device and
storage device)
Installing or Upgrading a New Driver
The AB232A HBA is a plug-and-play device that is detected by Windows
operating systems. Perform the following steps to add or update the Windows
driver to a previously installed Windows system:
1. Install the HBA as described in Chapter 2 on page 17.
2. Restart or turn on the computer.
3. Browse to the the driver kit on the Smart Setup CD-ROM (or one you
downloaded from the website if it is more recent).
4. Double-click cp00xxxx.exe.
Note: Refer to the following website for the information about this Smart Component’s
final version number:
http://h18 000.www1.hp.com/storage/saninfra s truc ture.htm
l.
5. Follow the installation wizard instructions.
6. When the installation completes, you must reboot.
7. Repeat step 1 through step 6 for any additional HBAs. Make sure to reboot
after installing the driver for the last HBA.