Filter
Top Products
Diagnostic and Configuration Utilities
47AB232A PCI-X Host Bus Adapter Installation Guide
Mapping and Masking LUNs
From the LightPulse Utility Main menu screen:
1. Choose the desired HBA.
2. Expand the category list and choose Persistent Binding.
3. Click on a target. The Lunmap button becomes active.
4. Click Lunmap. The Lunmap window displays, as shown in Figure 3:
Figure 3: Lunmap window
Test Host Bus Adapters
Choose this option to run host-based internal and external loopback tests on the
HBAs.
From the LightPulse Utility Main menu screen:
1. Choose Test Host Bus Adapters.
2. Enable or disable the external loopback tests:
a. Enable the external loopback tests by choosing 1=Y. The default is
disabled, 0=No. Internal BIU PCI loopback and other loopback tests are
run automatically.
b. Choose 0=No if you do not have an external loopback connector.