Regulatory Compliance Notices
58 AB232A PCI-X Host Bus Adapter Installation Guide
Laser Safety
WARNING: To reduce the risk of exposure to hazardous radiation:
• Do not try to open the laser device enclosure. There are no user-serviceable
components inside.
• Do not operate controls, make adjustments, or perform procedures to the laser
device other than those specified herein.
• Allow only HP authorized service technicians to repair the laser device.
Certification and Classification Information
This product contains a laser internal to the Optical Link Module (OLM) for
connection to the Fiber communications port.
In the USA, the OLM is certified as a Class 1 laser product conforming to the
requirements contained in the Department of Health and Human Services (DHHS)
regulation 21 CFR, Subchapter J. The certification is indicated by a label on the
plastic OLM housing.
Outside the USA, the OLM is certified as a Class 1 laser product conforming to
the requirements contained in IEC 825-1:1993 and EN 60825-1:1994, including
Amendment 11:1996.
The OLM includes the following certifications:
■ UL Recognized Component (USA)
■ CSA Certified Component (Canada)
■ TUV Certified Component (European Union)
■ CB Certificate (Worldwide)
The following figure shows the Class 1 information label that appears on the
metal cover of the OLM housing.