Filter
Top Products
Installing the SCSI Miniport Driver
27AB232A PCI-X Host Bus Adapter Installation Guide
Installing the LightPulse Utility
The LightPulse Utility, LpUtilNt (described in Diagnostic and Configuration
Utilities, on page 37) does not automatically load. HP recommends that after
loading the HBA driver, you install LpUtilNt as follows:
1. Browse to the LighPulse folder on the Smart Setup CD-ROM (or to one
downloaded from the web site if it is more recent).
2. Double-click cp00xxxx.exe.
Note: Refer to the following website for the information about this Smart Component’s
final version number:
http://h18 000.www1.hp.com/storage/saninfra s truc ture.htm
l.
3. Follow the installation wizard instructions.
4. After the installation completes, you can start the LightPulse Utility by
choosing Start > Programs > LpUtilNt.