Filter
Top Products
To create a network profile (Windows Vista)
NOTE: The product comes configured with a network profile with hp (product
model).(6-digit unique identifier) as the network name (SSID). However, for
security and privacy HP recommends you create a new network profile on your
computer as described here.
1. In the Control Panel, double-click Network and Internet, then Network and
Sharing Center..
2. In the Network and Sharing Center (under Tasks on the left), select Set up a
connection or network.
3. Choose the connection option Set up a wireless ad hoc (computer-to-computer)
network, then click Next. Read the description and warnings about ad hoc networks,
then click Next>.
4. Enter details, including Network name (the SSID for your ad hoc connection),
Security type, and SecurityPassphrase. If you are going to save this network
connection, check Save this network. Make a note of the SSID and the Security key/
Passphrase for future reference. Click Next
5. Continue to follow the prompts to complete setup of the ad hoc network connection.
To create a network profile (Windows XP)
NOTE: The product comes configured with a network profile with hp (product
model).(6-digit unique identifier) as the network name (SSID). However, for
security and privacy HP recommends you create a new network profile on your
computer as described here.
1. In the Control Panel, double-click Network Connections.
2. On the Network Connections window, right-click the Wireless Network
Connection. If you see Enable on the pop-up menu, select it. Otherwise, if you see
Disable on the menu, the wireless connection is already enabled.
3. Right-click the Wireless Network Connection icon, and then click Properties.
4. Click the Wireless Networks tab.
5. Select the Use Windows to configure my wireless network settings check box.
6. Click Add, and then do the following:
a.In Network name (SSID) box, type in a unique network name of your choice.
NOTE: The network name is case sensitive, so it is important to remember
any uppercase (capital) and lowercase (small) letters.
b. If there is a Network Authentication list, select Open. Otherwise, go to the next
step.
c.In the Data encryption list, select WEP.
d. Make sure that the check box is not selected next to The key is provided for me
automatically. If it is selected, click the check box to clear it.
Chapter 8
38 Connectivity
Connectivity