●
Primary memory modules (see
Primary memory module on page 67)
● Expansion memory modules (see
Expansion memory module on page 69)
●
Graphics board (see
Graphics board on page 115)
●
Processor heat sink (see
Processor heat sink on page 110)
● Processor (see
Processor on page 112)
● Modem module (see
Modem module on page 97)
Remove the system board:
1. Disconnect the power connector cable (1) from the system board.
2. Disconnect the network cable (2) from the system board.
3. Remove the 2 captive screws securing the fan (1).
Component replacement procedures 105