Filter
Top Products
9. Slide the Smart Card reader back toward the hinges on the Smart Card reader cover, and
remove the Smart Card reader board (2).
Reverse this procedure to reassemble and install the Smart Card reader.
Bluetooth module
NOTE: The Bluetooth module spare part kit does not include a Bluetooth module cable. The
Bluetooth module cable is included in the Cable Kit, spare part number 652545-001. See
Bluetooth
module cable on page 103 for information on replacing the Bluetooth module cable.
Description Spare part number
Bluetooth module 655792–001
Before removing the Bluetooth module, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
Battery on page 51).
5. Remove the service access cover (see
Service access cover on page 52).
Component replacement procedures 59