Filter
Top Products
Using the ProLiant Guide with HP D2D4106/4112 G2 models
When using the HP ProLiant DL180se G6 guide, be aware of the following HP D2D-specific
information:
• The CPU is Intel Xeon X5550 (Spare P/N 490070-001) – there are two per system
• The HP D2D has 12 removable hard disks. The 12th disk is an online spare disk. If one of
the other disks fails, the online spare disk immediately takes its place. (The HP D2D4106 has
12 x 500 GB hard disks; the HP D2D4112 has 12 x 1 TB hard disks.)
• The configuration of the system memory is 72 GB (9 x 8 GB DIMMs; 5 for the first processor,
4 for the second). The part number for each 8 GB DIMM is 500662-B21.
• The HP D2D is supplied with an HP Smart Array P212/Zero Memory Controller (with 512
MB and BBWC) pre-installed in one of the full-height PCI-e slots. For more information about
this card, search on http://www.hp.com/support/manuals. Part numbers are as follows:
◦ HP Smart Array P212/Zero Memory Controller: 462828-B21
◦ 512MB BBWC -Cache and BBWC: 462967-B21
◦ 512 MB memory: 462975-001
◦ BBWC: 462976-001
• The system has an HP Dual Channel 4Gb PCIe Fibre Channel Host Bus Adapter, part number
AE312A, which is installed in a full-height slot
Figure 3 Rear view of the HP D2D4106/4112 G2
6. VGA port for system console monitor1. Power supply cable sockets (two)
7. USB ports for system console keyboard and mouse2. LAN port 1 (always used for data connection)
8. RAID controller3. LAN port 2
9. Fibre Channel card (HP D2D4106fc/4112)4. Management LAN port (Do not use for data)
5. PCI-e slots
Using the ProLiant Guide with HP D2D2502/2504 G2 models
When using the HP ProLiant DL160se G6 guide, be aware of the following HP D2D-specific
information:
• The CPU is the Intel Xeon E5520, part number 506013-001. There is one per system.
• The HP D2D has four removable hard disks.
• There is no optical media storage.
HP D2D and HP ProLiant 9