Filter
Top Products
system attributes. The System Insight Display LEDs identify components experiencing an error,
event, or failure.
CAUTION: Do not block airflow by pushing the SID flush against the server while it is in the
down position.
IMPORTANT: When removing the access panel to view the Systems Insight Display LEDs, leave
the server powered on. The Systems Insight Display LEDs are cleared when the server is powered
off.
NOTE: The system management driver must be installed for the internal system health LED
to provide pre-failure and warranty conditions.
ComponentLED
System powerPOWER
Internal component healthINT HEALTH
External component healthEXT HEALTH
Over temperatureTEMP
FanFAN X
Power supplyPS X
I/O backplane powerIO BOARD
SPI board powerSPI BRD
SPI board not fully seated into the I/O backplaneSPI ILK
I/O backplane not fully seated into the midplane boardMP INTERLOCK
Processor memory board cell 8 (boot CPU) not fully seated into the midplane
board
CPU INTERLOCK
DIMM slotPROCESSOR/MEMORY BOARD X
DIMM 1A-8D
System Insight Display LEDs 11