Filter
Top Products
2. Remove the processor memory cell and airflow baffle (“Removing the processor memory
cell and airflow baffle” (page 39)).
3. Open the DIMM slot latches.
4. Remove the DIMM slot filler.
5. Install the DIMM.
Hard drive guidelines
When adding hard drives to the server, observe the following guidelines:
• The system automatically sets all device numbers.
• If only one hard drive is used, install it in the bay with the lowest device number.
• Hard drives must be SFF types.
• Drives must have the same capacity to provide the greatest storage space efficiency when
drives are grouped together into the same drive array.
• The server supports up to eight SAS or SATA hot-plug hard drives.
Hard drive guidelines 47