Filter
Top Products
Removal and Replacement Procedures
Maintenance and Service Guide 5–63
✎
Steps 5 and 6 apply only to Compaq Presario V2000 notebook
models.
5. Release the ZIF connector 1 to which the LED board cable is
connected and disconnect the cable 2 from the system board.
6. Remove the 2 PM2.0×3.0 screws 3 that secure the LED
board to the top cover.
Removing the LED Board Screws, Compaq Presario V2000
Notebook Models Only
7. Remove the LED board.
Reverse the above procedure to install the LED board.