Filter
Top Products
Display assembly
NOTE: All display assemblies include a webcam, 2 microphones, and 2 wireless antenna transceivers
and cables.
Description Spare part number
15.4-inch WSXGA+ AntiGlare display assembly 484372-001
15.4-inch WSXGA+ BrightView display assembly 484368-001
15.4-inch WXGA AntiGlare display assembly 484371-001
15.4-inch WXGA Brightview display assembly 484367-001
Before removing the display assembly, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
Battery on page 52).
5. Disconnect the wireless antenna cables from the WLAN module (see
WLAN module on page 65).
6. Remove the switch cover and keyboard (see
Switch cover and keyboard on page 69).
7. Remove the speaker assembly (see
Speaker assembly on page 74).
Remove the display assembly:
1. Disconnect the display panel cable (1) and the webcam/microphone cable (2) from the system
board.
76 Chapter 4 Removal and replacement procedures