Filter
Top Products
Display assembly
Description Spare part number
15.4-inch, WXGA, BrightView display assembly for use with computer models equipped with a
camera and microphones (includes camera, microphones, and WLAN transceivers and antenna
cables)
446481-001
15.4-inch, WXGA, BrightView display assembly for use with computer models equipped with
microphones (includes microphones and WLAN transceivers and antenna cables)
446482-001
Before removing the display assembly, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see
Battery on page 36).
5.
Remove the memory/WLAN module compartment cover (see
Memory module on page 43).
6.
Disconnect the wireless antenna cables from the WLAN module (see
WLAN module on page 46).
7.
Remove the keyboard (see
Keyboard on page 53).
8.
Remove the switch cover (see
Switch cover on page 49).
Remove the display assembly:
1.
Close the computer and turn it upside down, with the rear panel toward you.
2.
Remove the Phillips PM2.5×8.0 screws that secure the display assembly to the computer.
3.
Turn the computer display-side up, with the front toward you.
4.
Open the computer to an upright position.
Component replacement procedures 55