Filter
Top Products
RTC battery
NOTE: Removing the RTC battery and leaving it uninstalled for 5 or more minutes causes all
passwords and CMOS settings to be cleared.
Description Spare part number
RTC battery 449137-001
Before removing the RTC battery, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
Battery on page 41).
5. Remove the keyboard (see
Keyboard on page 55).
Remove the RTC battery:
1. Press the clip on the right side of the battery socket (1) toward the right until the battery disengages
from beneath the clip.
2. Remove the RTC battery (2) from the system board.
Reverse this procedure to install the RTC battery.
58 Chapter 4 Removal and replacement procedures