HP (Hewlett-Packard) FN038UAABA Laptop User Manual


 
Reverse this procedure to install the USB/eSATA board.
Speaker assembly
Description Spare part number
Speaker assembly 494029-001
Before removing the speaker assembly, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the following components:
a. Battery (see
Battery on page 41)
b. Keyboard (see
Keyboard on page 55)
c. Switch cover (see
Switch cover on page 59)
d. Display assembly (see
Display assembly on page 70)
e. Top cover (see
Top cover on page 78)
Remove the speaker assembly:
1. Remove the two PM2.5×4.0 screws (1) that secure the speaker to the base enclosure.
2. Disconnect the speaker cable (2) from the system board.
3. Remove the speaker assembly (3) from the base enclosure.
Component replacement procedures 83