Filter
Top Products
3.13 Other Modes
3-109
6
Press the ENTER key again. The message
Processing
appears for a second,
followed by
Waiting
.
7
While the message display is indicating Waiting (for 30 seconds by default), send
data to be hex-dumped to the printer. The message display indicates Processing
while the data is being received.
You can cancel printing of any more dump data by pressing the GO key and then the
CANCEL key.
8
Once all data has been received, the message Waiting will appear. Press the GO key
to finish hex-dump printing.
3.13.5 Printer Resetting
The procedure described below resets the printer’s temporary conditions, such as the current
unit of measurement, page orientation, font, character code set, margins, etc., set by commands
to their default values. Downloaded fonts and macros are deleted from the printer’s memory.
1
Press the MENU key.
2
Press the U or V key repeatedly until Others > appears.
3
Press the Z key.
4
Press the U or V key repeatedly until >Printer Reset appears.
Processing
Waiting
Others >