Filter
Top Products
3.1 Understanding the Operator Panel
3-3
Error codes
See Chapter 5 Troubleshooting.
3.1.2 Indicators in Message Display
Figure 3-2
Interface Indicator (INTERFACE)
The interface indicator shows the interface that is currently in use:
Each interface has a timeout time of 30 seconds during which the other interface should wait to
receive a print job. Even a print job has been complete on the interface, you should wait for
this period until the other interface begins printing the job.
Please wait
(Calibrating)
The color calibration function is being performed automati-
cally as you powered on the printer.
You can also execute this function manually on the operator
panel. For details, see Section 3.11.4 Color Calibration on
page 3-100.
Ready The printer is ready to print.
Processing The printer is receiving data to print. This is also shown when
the printer is reading a memory card or hard disk.
Sleeping The printer is in sleep mode. The printer wakes from sleep
mode whenever a key on the operator panel is pressed, the
cover is opened or closed, or a print job is received. The printer
then warms up and goes on-line. For details on sleep mode, see
Section Sleep Timer Timeout Time on page 3-107.
Cancelling data Jobs inside the printer are being canceled. To cancel a job, see
Section 3.1.3 Keys on page 3-6 .
Waiting The printer is waiting for the rest of print job before complet-
ing the last page. Pressing the GO key allows you to obtain the
last page immediately. See below.
FormFeed TimeOut The printer is printing the last page after a waiting period.
Message Meaning
Table 3-1 (Continued)
PAR Parallel interface is in use.
SER Serial (RS-232C) interface is in use.
OP1 (2) Network interface is in use.
--- No interface is in use.