Filter
Top Products
Keyboard
Description Spare part number
For use in the United States, Black 640892-001
For use in French Canada, Black 640892-121
For use in the United States, Pink 651083-001
For use in French Canada, Pink 651083-121
Before removing the keyboard, remove the following components:
1. Battery (see
Battery on page 40)
2. Service access cover (see
Service access cover on page 41)
Remove the keyboard:
1. Remove the Phillips 4.0 x 2.5 screw (1) in the WLAN module bay that secures the keyboard to
the computer.
2. Using a thin, flat-bladed screwdriver, gently pry loose the three snaps (2) inside the battery bay
to release the top edge keyboard tabs.
3. Turn the computer right-side up, with the front toward you.
4. Open the computer as far as possible.
5. Lift the rear edge of the keyboard, and then tilt the keyboard forward onto the palm rest (1).
6. Release the zero insertion force (ZIF) connector (2) to which the keyboard cable is attached, and
then disconnect the keyboard cable (3) from the system board.
50 Chapter 4 Removal and replacement procedures ENWW