Filter
Top Products
Power connector
Description Spare part number
Power connector (includes cable) 640891-001
Before removing the power connector cable, remove the following components:
1. Battery (see
Battery on page 40)
2. Service access cover (see
Service access cover on page 41)
3. Hard drive (see
Hard drive on page 42)
4. Optical drive (see
Optical drive on page 44)
5. Keyboard (see
Keyboard on page 50)
6. Top cover (see
Top cover on page 52)
Remove the power connector:
1. Turn the computer right-side up, with the right side toward you.
2. Disconnect the power connector cable (1) from the system board.
3. Lift the power connector (2) from the clips built into the base enclosure.
Reverse this procedure to install the power connector.
ENWW Component replacement procedures 61