Filter
Top Products
10. To replace the webcam module (select models only), lift the webcam module as far from the
display enclosure as the webcam module cable allows.
11. Disconnect the webcam module cable (1) from the webcam module, and then remove the
webcam module (2). The webcam module is available using spare part number 640880-001.
Reverse this procedure to install the webcam module.
12. To replace the display hinge covers, remove the three Phillips 4.0 x 2.5 screws (1) that secure
the covers to the display enclosure.
ENWW Component replacement procedures 65