Filter
Top Products
Power connector
Description Spare part number
Power connector 641137-001
Before removing the power connector cable, remove the following components:
1. Battery (see
Battery on page 44)
2. Service access cover (see
Service access cover on page 45)
3. Hard drive (see
Hard drive on page 46)
4. Optical drive (see
Optical drive on page 48)
5. Keyboard (see
Keyboard on page 53)
6. Top cover (see
Top cover on page 56)
Remove the power connector:
1. Position the computer right-side up.
2. Disconnect the power connector cable (1) from the system board.
3. Lift the power connector (2) away from the clips built into the base enclosure.
Reverse this procedure to install the power connector.
64 Chapter 4 Removal and replacement procedures ENWW