Filter
Top Products
Chapter 6 • Upgrading and Servicing Your Computer
63
Removing a DIMM
To remove a DIMM:
1
Turn off the computer and all peripherals.
Disconnect the power cord and modem cable.
2
Remove the computer cover. (See the booklet
Removing the Computer Cover.)
3
Push down on the two retaining clips on the
ends of the DIMM socket until the DIMM
pops out of the socket.
Warning:
Do not pull the DIMM out of the socket.
Use the retaining clips to eject the DIMM.
4
Holding the DIMM by its edges only, lift it
away from the socket. Store it in its antistatic
packaging.
5
Replace the computer cover and reconnect
your cables.
6
Run the BIOS Setup program to adjust your
memory setting. (See “Starting the BIOS
Setup Program” on page 66.)