Filter
Top Products
6-5
Message Value Description
CFG ETALK NO
YES
Selects whether you want to access the
EtherTalk menu and set the AppleTalk
phase parameter (ETALK PHASE=1 or 2)
for your network.
Resetting the EIO Card
To restore the factory default values to HP JetDirect EIO print server card:
1. Turn off the printer.
2. While holding down the Item and Resume buttons on the printer's
control panel, turn on the printer.
All previously stored EIO settings will be lost.
Understanding Printer Messages
Message Explanation Solution
CANCELLING
JOB
The printer is canceling
the current print job.
PAPER JAM,
OPEN COVER
AND CLEAR
PAPER
Paper is jammed in the
printer.
Clear the jammed paper. For
more information, see page
7-4.
[COLOR] INK
CARTRIDGE
EMPTY
The cartridge is out of
ink and the printer will
not print until the
cartridge is replaced.
Remove the ink cartridge.
Reinstall the cartridge and try
to print. If the error persists,
replace the empty cartridge.
REPLACE
[COLOR] INK
CARTRIDGE
The printer detects a
faulty ink cartridge.
Reinstall the faulty ink
cartridge and try to print. If
the error persists, replace the
cartridge.
[COLOR] INK
CARTRIDGE
MISSING
The printer cannot
detect the ink cartridge
because it is missing,
improperly installed, or
defective.
Open the ink cartridge door
and check if the cartridge is
missing, improperly installed,
or the wrong cartridge. If
none of these solutions work,
replace the cartridge.