Filter
Top Products
Step 8 – Install the Printer Software
HP DesignJet ColorPro Series: Getting Started Guide 10
3. Unpack the Paper Length and Width guides.
4. Insert the Paper Length guide into the slot of the paper size you
wish to load.
5. Insert the Paper Width guide into the slot of the paper size you
wish to load.
6. Load paper by aligning the paper edge to the Paper Length
guide first. Tap the other end of the paper to ensure that the
paper is properly loaded.
7. Re-insert Tray 3 back into the printer.
8. On the Control Panel, press [Menu] until PAPER HANDLING
MENU appears.
9. Press [Item] to select TRAY 3 TYPE=
10.Press [Value] to select the media type you have loaded into the
tray and press [Select].
Step 8 – Install the Printer Software
Before you can use the printer, you must install the printer software.
To install the printer software, you need at least the amounts of
memory listed in the User’s Guide installed in your computer.
For the HP DesignJet ColorPro GA printer, software supplied
includes:
• Adobe PressReady driver for PostScript
• HP ColorSync color profiles (for you to install if your
operating system does not contain HP ColorSync)
3
A3
3
3
3
A3